Sat

Purpose

The purpose of this feature is to allow users the ability to automate control of LEO (Low Earth Orbiting) satellites while connected to a F6K radio (6500 or 6700).

Requirements

Software

• SatPC32 is required to obtain satellite name, frequency data and rotor tracking ability.
• QRZ.com XML subscription if QSO partner data retrieval is desired.
• DXLab's DXKeeper logging program if auto logging is desired.

Hardware

• 2m & 70cm transverters.

Setup

SatPC32

Configure in the normal manner except omit Cat control for the radio as DDUtil will take care of that.

DDUtil Setup

Open the Other tab in DDUtil and go to the Satellite group.

• Select the virtual serial port for SatPC32.
• Enter the QRZ.com ID and Password if you want to be able to lookup call signs.
• Enter UHF and VHF macros if used.
• Select whether you want to use DXKeeper or an ADIF file for logging QSOs.

Operation

DDUtil Setup Window

Open the Other tab in DDUtil and go to the Satellite group.

Notes

This feature is only available for Flex 6K users.