Revision History

• 30123
  • Repaired bug from the new Oper/Stby icon addition where an error would occur is the Auto Drive feature was not enabled.
  • Added a new Yaesu rotor type for users of the GS232B rotor controllers.

• 30102
  • Repaired CX-Auto defect where last antenna used was shown even if all antennas were grounded.
  • Fixed some Icom PW-1 defects and received conformation the PW-1 amp is correctly following frequency.
  • Added validation code for PTT/Tune Detect check boxes.
  • Validated Passive Listener Slave Radio type Icom w/CI-V is working correctly.
  • Added file dialog for the Band Data File 'Save' button (LPT tab).
  • Validated the Wave Node WN2 wattmeter is working correctly.
  • Added Auto Drive PTT state indication to the Task Bar icon. Now if you have Auto Drive enabled the Task Bar icon will change color to match the Oper/Stby button on the Misc. form.

• 30095
  • Repaired RCP2 rotor port defect.
  • Added test to not allow DDUtil to start if it's already running.
  • Added new dockable window for CX-Auto antenna switch (Other tab).
  • Fixed defect where Icom PW-1 amp would not respond.
  • Added error trap for bad ZZTS data from PSDR.

• 30088
  • Fixed a defect where the BOBC check box in the Auto Drive group would un-check if the Auto Drive enable check box was toggled.
  • More work on RCP/Diagnostics Cat Message display stability.
  • Added PTT Detect feature on the Feature tab Options group.

• 30086
  • Fixed regression that prevented DDUtil from appearing in the Task bar.
  • Repaired bad links in the Help menu.
  • Fixed defect in Errors showing properly in DDUtil Title Bar.
  • repaired Cat Message code defect in RCP1-6 routines.
  • Renamed Cat Messages form to Diagnostics
    • Added Performance tab
    • Added Cat Monitor tab
  • Added New Short-Cut keys
    • [Alt] + D Opens Diagnostic form
    • [Alt] + S Opens Setup form
    • [Alt] + [Shift} + S Closes Setup form
  • Added Files tab to the Setup form (file locations)
    • SmartSDR - Reserved for future use
    • Cat Commander - Required for auto start/connect of Cat Commander
    • PowerSDR - Required for remote start if PSDR start option is selected in the Tools menu Start Radio.
  • Added detection and auto start capability for Cat Commander.

    DDUtil requires Cat Commander to be present and running to service DDUtil RCP clients and to support some internal functionality.

  • Fixed a defect that omitted the file type for the Options menu Backup User Settings selection It now defaults to xml.

• 30080
  • Added sorting to Band data GUI (GetBandData()).
  • Added Auto PTT check box to Auto Drive tab.
  • Added window click event to PA Temp to change from C <--> F degrees.

• 30079
  • Added S-Meter avg & peak data to F6000 tab
  • Added try/catch to StepPortMsg to catch errors.
  • Added Disable Auto Update checkbox to Features tab to allow choice of automatically checking for version updates.
  • Added PTT Macro texy boxes to Auto Drive tab to allow macro execution when Oper/Stby mode is changed.
  • Added 60 meter setting to USB8 relay board on Feature tab.

• 30078
  • Enabled Auto Update Check for new version.
  • Bumped version for Auto Update test.
• 30075
  • Enabled AutoDrive for F6K.

• 30074
  • Added CAT Commander client code.
  • Added Quick Memory name note to Misc form Title Bar.
  • Refactored Quick memory code to repair short-cut key defect.
  • Fixed SM0 bad data error messages when PSDR in transmit/tune mode.

• 30073
  • Added retention days window for Auto Save Backup File check box on Features tab.
• 30072
  • Fixed USB8 defect that caused error if selected and up plugged.
• 30071
  • Added default Station Location info to settings.
  • Reworked Rotor code to allow Heading window to be optional.
  • Added traps to catch ConvertToInt32 errors in ParseZZDU routine.
• 30069
  • More work on SPE amp code to stablize.
• 30068
  • SPE amp un-responsive. Found several defects and not all code complete.
  • SerMacPort un-responsive. Repaired defects
  • Added Invoke to DDDT/DDRT in DDParse
  • Corrected Setup context menu to correctly find SerMacPort on Ports tab.
• 30067
  • Reworked Tuning Knob to not fail 2nd enable
  • Error message displayed on A9500 start-up. Reworked A9500 start-up code
• 30066
  • Extended error handling code to catch "Input string not in correct format" errors.
  • Fixed Misc form Split indicator where it syncs with PSDR Split function.
  • Re-factored Heros code to not turn off Bypass if out of ham bands.

• 30065
  • Added Drive Power to the Flex Control (TKnob) shaft encoder menus.

• 30064
  • Repaired a defect where station info would not persist if a rotor wasn't enabled.
  • Reworked the Remote Start feature to correct defects.
  • Completed Alpha 87A amplifier support (needs testing).

• 30062
  • Added KAT500 macros DDEA, DDEM, DDET
  • RCP6 is now persistent (Ports tab)
  • Scratch pad is now persistent (Ports tab)
  • Fixed ACOM 2K auto start issue
  • Removed default Com settings from Rotor setup
  • Changes to the BCD data file no longer require a restart to work properly.

• 30060
  • Added KAT500 macros DDEA, DDEM, DDET
  • Fixed RCP6 not persistent (Ports tab)
  • Fixed Scratch pad not persistent (Ports tab)
  • Fixed ACOM 2K auto starting on DDUtil start
  • Removed default Com settings from Rotor

• 30059 → Released to Beta testers

• 30058
  • Added Heros macros DDHA, DDHB, DDHL, DDHU, DDHY