Shortcut Keys

Short Cut Keys

DDUtil uses the following short cut keys while DDUtil has the window focus

General

• {F1 - F12} - Executes macros 1 - 12
• Shift + {F1 - F12} - Executes macros 13 - 24
• Ctrl + {F1 - F12} - Executes macros 25 - 36
• Ctrl + Shift + {F1 - F12} - Executes macros 37 - 48

• Alt + "C" - Clear Error Log
• Alt + "D" - Open Diagnostics form
• Alt + "O" - Open Error Log

• Ctrl + "A" - Same as pressing Set Auto Drive button
• Ctrl + "B" - Sets SteppIR antenna Bi-Directional mode
• Ctrl + "C" - Activates the Load function of the Quick Memory
• Ctrl + "F" - Sets SteppIR antenna Forward mode
• Ctrl + "L" - Enables the Low Power Drive mode
• Ctrl + "O" - Toggles the Operate/StandBy button
• Ctrl + "R" - Sets SteppIR antenna 180 (Reverse Direction) mode
• Ctrl + "~" (tilde) Toggles the Split Mode button
• Ctrl + "+" (num pad +) Tuning Knob tuning rate up
• Ctrl + "-" (num pad -) Tuning Knob tuning rate down
• Ctrl + "Page Up" - Steps through the tabs from left to right
• Ctrl + "Page Down" - Steps through the tabs from right to left

• Ctrl + Alt + "L" - Load
• Ctrl + Alt + "N" - Activates the Memory Note feature of the Quick Memory
• Ctrl + Alt + "R" - Recall Memory (steps 1-5)
• Ctrl + Alt + "S" - Save Memory (1-5)
• Ctrl + Alt + "T" - Toggles the speech synthesis (talk) on/off
• Ctrl + Alt + "U" - Undo last frequency move
• Ctrl + Alt + "V" - Switch Vfo/Memory

• Ctrl + Shift + Down Arrow - Move Rotator - 5 degrees.
• Ctrl + Shift + Up Arrow - Move Rotator + 5 degrees.
• Ctrl + Shift + "M" - Executes the selected macro in the macro editor (Macro tab)
• Ctrl + Shift + "S" - Toggles the radio Remote Power on/off button

Note: this feature requires a mod to the radio and external hardware to function