Difference between revisions of "RCP Redirect"
From DDUtilV3
m (WikiSysop moved page RcpRedirect to RCP Redirect without leaving a redirect) |
|||
| Line 1: | Line 1: | ||
| − | The '''RCP Redirect''' function allows '''Flex 6000''' users the ability to re-assign other Radio Slices 'C' - 'H' (per radio ability) for four of the '''RCP''' ports (3,4,5,6). This redirection has the following properties/restrictions for the connected '''RCP''' software. | + | The '''RCP Redirect''' function allows '''Flex 6000''' users the ability to re-assign other Radio Slices 'C' - 'H' (per radio ability) for four of the [[Glossary#Radio_Control_Program|'''RCP''']] ports (3,4,5,6). This redirection has the following properties/restrictions for the connected [[Glossary#Radio_Control_Program|'''RCP''']] software. |
| + | |||
| + | ==Restrictions== | ||
* Only the '''Kenwood''' radio type is supported. Other radio types '''CAT''' commands are not recognized. | * Only the '''Kenwood''' radio type is supported. Other radio types '''CAT''' commands are not recognized. | ||
* Only '''VFO A''' is supported. | * Only '''VFO A''' is supported. | ||
* '''Split''' operation '''IS NOT''' supported for re-assigned slices. Slice '''TX''' must be selected manually on the '''SSDR GUI'''. | * '''Split''' operation '''IS NOT''' supported for re-assigned slices. Slice '''TX''' must be selected manually on the '''SSDR GUI'''. | ||
| − | * '''Frequency''' and '''Mode''' may be assigned by the '''RCP''' software | + | |
| + | ==Properties== | ||
| + | * '''Frequency''' and '''Mode''' may be assigned by the [[Glossary#Radio_Control_Program|'''RCP''']] software. | ||
| + | ** Double-clicking a '''Telnet Spot''' entry will '''QSY''' the re-assigned slice's frequency and set it's mode. | ||
| + | ** Changing frequency and/or mode in an [[Glossary#Radio_Control_Program|'''RCP''']] program will adjust the slice accordingly. | ||
Revision as of 07:29, 22 July 2013
The RCP Redirect function allows Flex 6000 users the ability to re-assign other Radio Slices 'C' - 'H' (per radio ability) for four of the RCP ports (3,4,5,6). This redirection has the following properties/restrictions for the connected RCP software.
Restrictions
- Only the Kenwood radio type is supported. Other radio types CAT commands are not recognized.
- Only VFO A is supported.
- Split operation IS NOT supported for re-assigned slices. Slice TX must be selected manually on the SSDR GUI.
