Difference between revisions of "DDClient"
From DDUtilV3
| Line 25: | Line 25: | ||
**'''SteppIR''' → Set SteppIR Yagi '''Forward/Reverse''' direction. | **'''SteppIR''' → Set SteppIR Yagi '''Forward/Reverse''' direction. | ||
==Operation== | ==Operation== | ||
| − | * '''DDUtil v3''' | + | * Start '''DDUtil v3''' on the '''Host PC''' that has the hardware connected. |
| − | * '''DDClient''' | + | * Start '''DDClient''' from any PC on the '''Local Area Network'''. |
| + | * Right-click on the '''DDClient''' form background and select the desired options to display. | ||
Revision as of 14:36, 22 September 2013
Contents
General
The DDClient application is to demonstrate how to use the TCP Server function of DDUtil v3. This application will allow control of critical DDUtil functions from any PC on the Local Area Network while the main DDUtil application resides on the primary PC where the hardware is connected.
If desired the main DDUtil application may be minimized to conserve screen space and DDClient displayed for discreet control of critical functions.
May be used with Legacy or Signature radios.
Features
Fixed
- Not optional (selectable)
- Auto Drive → Set the Auto Drive Oper/Stby mode
- PA Temp → Monitor radio PA temperature
Options
- Selectable from a right-click Context Menu
- Amp Control → Control basic functions of selected amp.
- KPA500 (Power, Mode)
- Alpha A9500 (Power, Aux, Mode, Auto, Ant)
- Acom 2K (Power, Mode)
- SPE 1K-FA (Power, Mode)
- CX-Auto → Set CX-Auto switch position.
- Macro → Execute a DDUtil macro.
- Rotor → Turn rotor to heading.
- SteppIR → Set SteppIR Yagi Forward/Reverse direction.
- Amp Control → Control basic functions of selected amp.
Operation
- Start DDUtil v3 on the Host PC that has the hardware connected.
- Start DDClient from any PC on the Local Area Network.
- Right-click on the DDClient form background and select the desired options to display.
