TCP Server

General

Allows third party Ethernet clients to remotely control DDUtil_V3 functionality.

Setup

Connection

Connections are restricted the Local Area Network (LAN) that DDUtil is connected to.

• Use the IP address of the host PC DDUtil is open on; i.e. 192.168.1.xxx.
• Use port 5678

Commands

Command P1 P2 P3 P4 Usage Returned Value

GETSLICE  - Gets frequency of slice n (n = 0-7)						  
   Form:    GETSLICE P1 \r\n			
   Parm:    P1 = Slice number 0-7
   Uses:    GETSLICE2\r\n	
   Rtrn:    Slice2:00014123456

SETSLICE - Sets frequency for slice n (n = 0-7) SETSLICE n{1} : n{11} \r\n SETSLICE2:00014100000\r\n ACK

GETROTOR - Gets selected rotor heading GETROTOR \r\n GETROTOR\r\n Head: 090

SETROTOR - Turns selected rotor to heading nnn SETROTOR n{3} \r\n SETROTOR090\r\n ACK

TOGGLEPTT - Toggle Auto Drive Oper/Stby (PTT) TOGGLEPTT \r\n TOGGLEPTT\r\n PTT: {Oper|Stby}

A95PWR - A9500 Amp Power On A95PWR \r\n A95PWR\r\n ACK

A95AUX - A9500 Amp Aux On/PowerOff A95AUX \r\n A95AUX\r\n ACK

A95AUTO - A9500 Amp Auto Mode On/Off (toggle) A95AUTO \r\n A95AUTO\r\n ACK

A95ANT - A9500 Amp Antenna Select (steps 1-4) A95ANT \r\n A95ANT\r\n ACK

A95MODE - A9500 Amp Oper/Stby (toggle) A95MODE \r\n A95MODE\r\n ACK