The '''DDUtil''' solution for this is to save the drive setting for each band and then reload them as needed when the bands change. To demonstrate, say it takes 44 watts of drive to produce 1000 watts of power from the amplifier on 20 meters and 50 watts of drive to produce the same output on 15 meters. '''DDUtil''' will set the correct level automatically for each band so the amplifier is neither over or under driven.
 
The '''DDUtil''' solution for this is to save the drive setting for each band and then reload them as needed when the bands change. To demonstrate, say it takes 44 watts of drive to produce 1000 watts of power from the amplifier on 20 meters and 50 watts of drive to produce the same output on 15 meters. '''DDUtil''' will set the correct level automatically for each band so the amplifier is neither over or under driven.