Difference between revisions of "KPA1500"
(Created page with "==General== '''DDUtil''' is proud to support the '''Elecraft KPA-1500''' amplifier. This amp will output a full 1500 watts of RF power and also contains a fully automatic ante...") |
(No difference)
|
Revision as of 12:19, 20 September 2018
General
DDUtil is proud to support the Elecraft KPA-1500 amplifier. This amp will output a full 1500 watts of RF power and also contains a fully automatic antenna tuner. See the following Controls section for a description of functionality.
Controls
PWR - Toggles Mains Power on/off.
Temp - Displays PA temp (press to toggle F/C)
I - Displays PA current.
E - Displays PA Volts.
Fan - Press to step through (set) Minimum cooling fans speed. Does not indicate actual fan speed which is controlled by PA temperature.
ATU - Toggles ATU in-line or bypassed.
Tune - Press to initiate ATU tune cycle.
Ant - Press to select (toggle) amplifier output antenna (1|2).
Mode - Press to toggle amplifier mode (Operate/Standby).
Reset - Press to reset amplifier fault.
Info Window - Displays Select Amplifier Information and Amplifier Error Messages. Double-click to erase.
